DESCRIPTION

LoRaWAN asset tracker was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks.

Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.

The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.

CONSTRUTAG has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.

SPECIFICATIONS
Enclosure dimensions54 x 35 x 23 mm excluding fasteners
Operational temperature range-40…+85 °С
Operational humidity range0-100%
Ingress protection ratingIP-65
InstallationUsing screws, screeds, double-sided tape
Weight< 30g
Operating range of supply voltages3.0-3.6В
BatteryReplaceable Li-SOCL2 battery type ER14335
Battery lifeup to three years depending on settings
Geolocation methodWi-Fi/GNSS
Geolocation periodcustomizable
Wi-Fi frequency range2401-2495 MHz
Wifi sensitivity–97 dBm
Wi-Fi transmit power19dBm
Supported global navigation satellite systemsGLONASS/GPS/QZSS
Number of channels 99
Frequency range1575,42-1615,5 MHz
Sensitivity-165dBm
Cold start time60s
Hot start time6s
Embedded RTC sync with GNSSyes
Communication standardLoRaWAN 1.0.3 class A
Radio frequency range864-1000 MHz
Maximum transmit power20 dBm
Sensitivity-137dBm
Network activation methodABP/OTAA
Supported LoRaWAN regionsRU864/AS923/AU915/EU868/KR920/IN865/US915
Adaptive data rate (ADR)yes
Data transfer periodfrom 1 minute to 1 day
Embedded RTC sync with LoRaWAN networkyes, with adjustable interval
LoRaWAN packet confirmationyes, configurable
LoRaWAN data ratefrom DR0 to DR5
Motion activity calculation methodusing the built-in accelerometer
Motion activity averaging intervalfrom 15 to 1440 minutes
Shock detection functionYes
Sleep mode if not activeYes, with adjustable interval
Configuration interfaceBluetooth low energy
Frequency range2402-2480 MHz
BLE beacon transmission period20 seconds

Asset tracker

CONSTRUTAG

Receiving coordinates or mac addresses of Wi-Fi access points, as well as data from the periphery and data transmission via LoRa

BASE STATION

Receiving data transmission from device to server

LoRaWAN NETWORK SERVER

The server is responsible for the operation of the lorafan network

INTERNET

Data transport from server to user and back

USER APPLICATIONS

Displaying data on your user devices

Sealed, dust and moisture resistant housing

The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.

You can install the tracker at any place available on the site.

In case of storage of goods in an enclosed area, the CONSTRUTAG tracker determines the location by GLONASS

Long battery life

Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.

Preset options for device operation simplify its configuration:

1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2.  “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3.  “SEARCH” mode is activated by the downlink command.

Asset movement monitoring

By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock.

The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer.

Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.

MAIN FUNCTIONS

Positioning using a Wi-Fi sniffer

Positioning using GPS / GLONASS

Determination of motion activity and strokes

Burglary / Tampering detection with Hall sensor

APP CONSTRUTAG

A convenient application for those who often work outside the office, as well as for wireless device settings. After installing the special ConstruTag application, you get access to the device remotely and can use the data from the smartphone screen.

You can install the application through the Google Play Market

contact us

Belgium – Brussels

Parvis Sainte Gudule 5 1000 Brussels, Belgium

+32 2 319 5426

Russia – Novosibirsk

630058, Russkaya 40

+7 (383) 382-81-81

Leave your contact details

DESCRIPTION

LoRaWAN asset tracker was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks.

Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.

The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.

CONSTRUTAG has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.

SPECIFICATIONS
Enclosure dimensions54 x 35 x 23 mm excluding fasteners
Operational temperature range-40…+85 °С
Operational humidity range0-100%
Ingress protection ratingIP-65
InstallationUsing screws, screeds, double-sided tape
Weight< 30g
Operating range of supply voltages3.0-3.6В
BatteryReplaceable Li-SOCL2 battery type ER14335
Battery lifeup to three years depending on settings
Geolocation methodWi-Fi/GNSS
Geolocation periodcustomizable
Wi-Fi frequency range2401-2495 MHz
Wifi sensitivity–97 dBm
Wi-Fi transmit power19dBm
Supported global navigation satellite systemsGLONASS/GPS/QZSS
Number of channels 99
Frequency range1575,42-1615,5 MHz
Sensitivity-165dBm
Cold start time60s
Hot start time6s
Embedded RTC sync with GNSSyes
Communication standardLoRaWAN 1.0.3 class A
Radio frequency range864-1000 MHz
Maximum transmit power20 dBm
Sensitivity-137dBm
Network activation methodABP/OTAA
Supported LoRaWAN regionsRU864/AS923/AU915/EU868/KR920/IN865/US915
Adaptive data rate (ADR)yes
Data transfer periodfrom 1 minute to 1 day
Embedded RTC sync with LoRaWAN networkyes, with adjustable interval
LoRaWAN packet confirmationyes, configurable
LoRaWAN data ratefrom DR0 to DR5
Motion activity calculation methodusing the built-in accelerometer
Motion activity averaging intervalfrom 15 to 1440 minutes
Shock detection functionYes
Sleep mode if not activeYes, with adjustable interval
Configuration interfaceBluetooth low energy
Frequency range2402-2480 MHz
BLE beacon transmission period20 seconds

Sealed, dust and moisture resistant housing

The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.

You can install the tracker at any place available on the site.

In case of storage of goods in an enclosed area, the CONSTRUTAG tracker determines the location by GLONASS

Long battery life

Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.

Preset options for device operation simplify its configuration:

1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2.  “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3.  “SEARCH” mode is activated by the downlink command.

Asset movement monitoring

By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock.

The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer.

Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.

MAIN FUNCTIONS

Дизайн без названия - 2020-07-27T174018.587

Positioning using a Wi-Fi sniffer

Дизайн без названия - 2020-07-27T174555.612

Positioning using GPS / GLONASS

Determination of motion activity and strokes

Дизайн без названия - 2020-07-27T175306.705

Burglary / Tampering detection with Hall sensor

APP CONSTRUTAG

A convenient application for those who often work outside the office, as well as for wireless device settings. After installing the special ConstruTag application, you get access to the device remotely and can use the data from the smartphone screen.

You can install the application through the Google Play Market

Открыть чат